General information
The blocking device SP1083600 is designated for the following applications:
•
To prevent persons from accessing the armed area of a burglar alarm system
•
For access control applications in order to allow access only to authorized
persons
•
Other applications, also if they are not in the field of safety (car, furniture, etc.)
Mechanic assembly / Safety
Due to the robust assembly made of plastic, a high reliability and durability of
more than 50 000 cycles is being achieved. If the blocking device fails, there are
electrical and mechanical emergency opening options available.
Features of the blocking device
•
VdS class C registered
•
Low noise
•
Integrated intelligent control
•
Little current consumption of less than 50 mA for the locking / opening
process
•
Current consumption in rest: <50 µA (also for active entrance)
•
Integrated bolt monitoring
•
Several closing trials, switching off when blocking
•
Can be directly connected to most systems
•
The connection is performed using a 4-pin connecting cable:
- Distribution voltage +12 V
- Distribution voltage 0 V
- Entry opened/closed, 0 V: Bolt extends (door locked), open or +12 V: Bolt
moved in
- Exit status opened/closed — active 0 V with blocking bolt moved out
•
Drive with statistic signal, several blocking devices are connectable
•
Feedback signal of the bolt position
•
Easy installation in the door frame. Only the counterpart will be installed to the
door leaf
•
Electrical emergency opening via the distribution voltage switching off / on
•
Mechanical emergency opening with predetermined breaking point at the bolt
•
The locking bolt can be exchanged when it is installed
•
Stable plastic construction
4
SP1083600 Motor-Driven Blocking Device EasyLock Installation Manual