Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The time is saved and the display dAY flashes
briefly.
Use
or
to set the day.
Confirm every position specified with the ENTER
key. 1- 12 display flashes briefly.
Use
or
to set the month.
Confirm every position specified with the ENTER
key. YEAr display flashes briefly.
Use
or
to set the year.
Confirm every position specified with the ENTER
key. dSt (summer time) ON display flashes.
Recommendation: Confirm the ON display with the
ENTER key. This ensures the system will automat-
ically change to summer/winter time.
9. Operation
9.1
Standby mode (waiting position)
Hold down the BACK key until the display Eolt ap-
pears. The heating device is in standby mode.
To return to the previous operating status, briefly
press the BACK key.
9.2
Switching heating operation on/off
Switching heating operation on
Press the MAIN MENU key. The TIMER symbol
flashes.
Press
or
to select the required operating mode.
The symbol flashes.
Confirm with the ENTER key.
Switching heating operation off
Press the MAIN MENU key. The TIMER symbol
flashes.
Press
or
to select the OFF symbol. The OFF
symbol flashes.
Confirm with the ENTER key.
www.ewt.eu
NOTE
Heating operation Off does not mean that the device is
completely disconnected from the power supply. To
disconnect the device from the electricity network,
please pull out the plug.
9.3
Manual operation
NOTE
The timer week program is deactivated in manual
operation.
The room temperature specification takes place manu-
ally.
Press the MENU key. The TIMER symbol flashes.
Press
or
MANUAL symbol flashes. Press the ENTER key.
Use
or
9.4
Frost protection
Specified frost protection temperature of 7° C.
Press the MENU key. The TIMER symbol flashes.
Press
or
FROST symbol flashes. Press the ENTER key.
FROST symbol and 7° C are displayed.
NOTE
The pre-set temperature value of 7° C can be changed
with
or
.
2101/A
to select the MANUAL symbol. The
to set the room temperature.
to select the FROST symbol. The
EN-5
Werbung
Inhaltsverzeichnis
