Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation and maintenance
A. Installation
NOTE
• Install the Docking Station in a place where
the floor and wall are level.
• If the Battery Charger cord is too long for
the installation environment, coil the power
cord around the cable management post,
then put it in the fixing groove at the rear
of the Docking Station.
B. Using the Jet Bot
B-1 Charging the Jet Bot
Charging
• Open the upper cover of the Jet Bot and
remove the white gasket.
• Remove the yellow gasket attached to the
power switch at the side of the Jet Bot and
press the power switch to turn the Jet Bot
on.
• Place the Jet Bot on the Docking Station
manually to start charging.
- Make sure the charging terminals on
the Jet Bot and the Docking Station are
aligned.
• Check the charging status.
- When charging starts, the Status Indicator
of the Jet Bot turns on (red, orange, or
yellow depending on charging progress),
it rises gradually, and changes to green
when the charging is complete.
Docking (Recharging)
• You can return the Jet Bot to the Docking
Station while cleaning to recharge.
- Press the [
] on the Jet Bot or use the
SmartThings App to select the recharging
function.
8
English
B-2 Starting cleaning
• Press the [
] on the Jet Bot to start
cleaning in Auto Clean.
• Press the [
] on the Jet Bot to stop
operation while cleaning.
- When pressing the [
returns to the Docking Station and starts
charging.
C. Cleaning the Jet Bot
Before maintenance work, you should turn off
the power switch at the side of the Jet Bot.
C-1 Emptying and cleaning the Dustbin
• Remove the dust on the filter and the
Dustbin, clean them with water, and dry
completely in the shade.
C-2 Cleaning the brush
C-3 Cleaning the Sensor Window
• Wipe the Sensor Window with a soft cloth.
C-4 Cleaning the Driving Wheel
C-5 Cleaning the Spin Brush
• If curl or deformation occurs, cover the
Spin Brush with a hot steamed cloth for 10
seconds, then wipe the Spin Brush.
• For detailed methods of use
and cleaning, refer to the QR
code.
], the Jet Bot
Werbung
Inhaltsverzeichnis
Fehlerbehebung
