Using The Vacuum Cleaner - Samsung VS20A95-Serie Benutzerhandbuch

Using the vacuum cleaner

Control Part
❇ ❇ Before using the product, you have to select a language for the first time. Use (+) or (-) button
to select a language and hold the (+) button for 3 seconds to complete the setting.
– Press and hold the (+) button for 3 seconds while using the vacuum to enter the language
setting mode later.
❇ ❇ To set the Energy Saving mode, press and hold the (+) button for 5 seconds while the vacuum
is on the Clean Station.
– To cancel the Energy Saving mode, press and hold the (+) button for 5 seconds.
– The Energy Saving mode is automatically exited if the vacuum is used.
01 Power ( ) on / off: Press the ( ) button to start cleaning in [MID] mode.
– When the Wet Brush is assembled, the vacuum starts cleaning in the Wet Brush mode.
02 Suction power mode control part: You can change the suction power mode.
– You can change the 4 steps [MIN, MID, MAX, JET] of the suction power with the (+) and (-)
button.
NOTE
• When the vacuum is in the Wet Brush mode, only the (+) button works.
• If the brush clings to the floor or does not turn properly depending on the floor material (a
carpet, a mat, bedding, etc.), adjust the suction power mode to [MIN] or [MID].
• While using the Wet Brush, the language setting is not supported.
16 English
01
02