Maintenance And Care; Minimize Wear And Avoid Damage - Stihl KGA 770 Gebrauchsanleitung

15 Maintenance and Care

15 Maintenance and Care
The following intervals apply to normal operating
conditions only. If your daily working time is longer
or operating conditions are difficult (very dusty work
area, etc.), shorten the specified intervals accord‐
ingly.
Set the on/off switch to 0 and remove the battery
before performing any work on the power tool.
Complete unit
Air filters
Side brooms and roller
brush
Gear assembly
Battery
Battery
Safety labels
1)
STIHL recommends an authorized STIHL servicing dealer.
2)
see "Inspection and Maintenance by User".
16 Minimize Wear and Avoid
Damage
Observing the instructions in this manual helps
reduce the risk of unnecessary wear and dam‐
age to the power tool.
The power tool must be operated, maintained
and stored with the due care and attention
described in this instruction manual.
0458-769-9621-C
Visual inspection (condi‐
tion)
Clean
Clean
Replace
Visual inspection (condi‐
tion)
Clean
Have replaced by serv‐
1)
icing dealer
2)
Lubricate
Visual inspection
Clean
Check operation (eject
battery)
Replace
► Pull both filters out of their guides.
► Take the foam element out of the filter.
► Wash the foam element in water, allow it to
dry and refit it in the filter.
► Refit the filters in their guides.
X
X
X X
X
X
X
The user is responsible for all damage caused by
non-observance of the safety precautions, oper‐
ating and maintenance instructions. This
includes in particular:
– Alterations or modifications to the product not
approved by STIHL.
– Using tools or accessories which are neither
approved or suitable for the product or are of a
poor quality.
– Using the product for purposes for which it
was not designed.
English
X
X
X
X
X
X X
X
X
35