Frequently Asked Questions
Problem
Blind does not work.
Blind is stepping.
Blind lowers too far.
Blind moves in the opposite
direction
MOTION CM-09/10 (Q)MC MECHANICAL TUBULAR MOTOR
Cause
Power supply is not connected.
The motor is overheated.
Two motors are connected to the same
switch.
End limits are set incorrect.
The direction of rotation has been
set incorrect.
Solution
Connect the wiring according to step 1.
Wait until the motor is cooled down.
Use separate switches for separate motors.
Set end limits. See step 3 - 6.
Change the direction cables on the switch.