Connecting Diagram - Motion CM-09MC Bedienungsanleitung

1

Connecting diagram

IMPORTANT:
When the mains cable is permanently connected, a readily accessible disconnect
device must be incorporated externally to the motor.
When there is a pluggable connecter installed on the mains cable, the socket-outlet
must be installed near the motor and shall be easily accessible.
1. Do not wire two or more motors to one single pole switch or relay.
2. Do not control one motor from several locations without using a proper controller.
3. Do not connect the brown wire and the black wire at the same time to the powersource,
this may permanently damage the motor.
M
T
MS 1
C
2
MOTION CM-09/10 (Q)MC MECHANICAL TUBULAR MOTOR
4
MS 2
3
1
L N
Mains Cable 230V
Neutral (1) Blue
Direction 1 (2) Brown
Direction 2 (3) Black
Ground (4) Green/Yellow
120V
White
Red
Black
Green