Sharp PN-HE751 Installationsanleitung Seite 10

1. Install the remote control batteries
1. Place your finger on the part marked with the
▲, and then pull the cover off.
2. See the instructions in the compartment and
put in the batteries (R03 or LR03 ("AAA"
size) x 2) with their plus (+) and minus (-)
sides oriented correctly.
3. Close the cover.
NOTE: • When the batteries become exhausted, replace them with new
(commercially available) batteries.
• The supplied batteries may become exhausted quickly depending on how
they are stored.
• If you will not be using the remote control for a long time, remove the
batteries.
• Use manganese or alkaline batteries only.
2. Connect external equipment
• To protect the external equipment, disconnect the power cord of this product before
making connections.
: Other signals
: Video signal
: Audio signal
LAN port
RS-232C input terminal
AUDIO OUT terminal (Audio output terminal)
USB Type-A port (USB port)
AUDIO IN terminal (Audio input terminal)
VGA input terminal (D-sub input terminal)
HDMI input terminals (HDMI1 (ARC)/HDMI2/HDMI3)
8