Stihl KG 550 Gebrauchsanleitung Seite 16

English
2.2.1 Clothing and Equipment
Wear sturdy shoes with non-slip soles.
STIHL offers a comprehensive range of personal
protective clothing and equipment.
2.3 The Power Tool
Never attempt to modify your machine in any
way since this may increase the risk of personal
injury. STIHL excludes all liability for personal
injury and damage to property caused while
using unauthorized attachments.
2.3.1 Transporting the Power Tool
Refer to the appropriate section in the instruction
manual.
Do not carry the power tool by the handle on the
hopper.
Transporting by vehicle: Properly secure the
machine to prevent it turning over, slipping and
being damage.
2.3.2 Cleaning the Power Tool
Always clean dust and dirt off the power tool – do
not use any grease solvents for this purpose.
Clean plastic surfaces with a damp cloth. Do not
use aggressive detergents. They may damage
the plastic.
When cleaning the side brooms or roller brush*
(* KG 770 only), wear sturdy work gloves to
reduce the risk of cut injuries from sharp objects.
Do not use a pressure washer to clean your
power tool. The solid jet of water may damage
parts of the power tool.
Do not spray the power tool with water.
Do not clean the side brooms or roller brush* (*
KG 770 only) with compressed air. The powerful
jet of air may damage the bristles.
2.3.3 Storing the Power Tool
When the machine is not in use, store it so that it
does not endanger others. Secure it against
unauthorized use.
Secure power tool to prevent it or the push han‐
dle falling over.
To reduce the risk of injury, do not reach into the
hinge area of the push handle – if the push han‐
dle accidentally falls over, parts of your body
may be pinched between it and the housing.
Store the machine is a safe and dry place.
16
2 Safety Precautions and Working Techniques
2.3.4 Accessories and Spare Parts
Only use parts and accessories that are explicitly
approved for this power tool by STIHL or are
technically identical. If you have any questions in
this respect, consult a servicing dealer. Use only
high quality parts and accessories in order to
avoid the risk of accidents and damage to the
machine.
STIHL recommends the use of genuine STIHL
replacement parts. They are specifically
designed to match the product and meet your
performance requirements.
2.4 Notes on Operation
2.4.1 Before Starting Work
Do not operate your power tool if any of its com‐
ponents are damaged.
Check that your power tool is properly assem‐
bled and in good condition – refer to appropriate
chapters in the instruction manual.
– Keep the handles dry and clean – free from oil
and dirt – for safe control of the power tool.
– Check that the push handle is firmly seated.
– Check condition of housing
– Check condition and security of hopper.
– Inspect side brooms and roller brush* (*
KG 770 only) for jammed objects and clogged
dirt – the bristles must move freely.
– Check sweeping pressure setting and, if nec‐
essary, set it to match the surface to be
cleaned.
– Never attempt to modify the controls or the
safety devices in any way.
To reduce the risk of accidents, do not operate
your power tool if it is not properly assembled
and in good condition.
2.4.2 During Operation
If one of the side brooms or the roller brush* (*
KG 770 one) becomes blocked, stop work and
remove the blockage. Wear sturdy work gloves
to reduce the risk of cut injuries from sharp
objects.
Never reach into rotating bristles – risk of injury.
Never bump against shelving, scaffolding, etc.
while working since there is a risk of objects top‐
pling over or falling from above.
Do not leave the power tool outdoors in the rain.
Do not operate the power tool without the hop‐
per.
0458-767-9921-F