Inhaltsverzeichnis
Werbung
1. Description
The wasco
®
interface card OPTOIO-PCIe32
inputs and 32 digital outputs with galvanic isolation, individually for each
channel. Optocouplers of high quality ensure the potential separation for
the inputs and outputs. All input optocouplers are bipolar. Special high
power output optocouplers can handle a maximum switching current of
up to 150 mA.
Each input or output is fitted with additional protection diodes against
harmful voltage peaks. You can adjust two different voltage ranges for
each single input channel by jumpers easily to set.
Output optocouplers are led to a 68-pin SCSI jack mounted to the board's
slot bracket. Optocoupler inputs are fed to a 68-pin SCSI jack on the
board. On demand a special cable (set of female connector, ribbon cable
and 68-pin female connector with slot bracket) is available, postponing the
connection to a slot of your PC casing.
Pin assignment and input voltage ranges are identical with PCI bus card
OPTOIO-PCI32
Furthermore the card provides a jumper block for a card identification.
This enables you to differentiate between several identical cards in your
system.
OPTOIO-PCIe32
© 2015 by Messcomp Datentechnik GmbH
STANDARD
. Therefore a switch to PCIe is easily to realise.
STANDARD
wasco
provides 32 digital
STANDARD
®
EV08
5
5
Werbung
Inhaltsverzeichnis
