clage Zip HydroTap G5 B 60 Gebrauchsanleitung Seite 24

Tap LEDs (Touch-Free excluded)
Red Hot Water LED
On all the time
This indicates that the hot water is ready.
Flashing slowly
This indicates that the temperature of hot water is not within the set
range.
When the hot water is at the set temperature, the light will stop
flashing. This could take several minutes.
The flashing light will typically occur after switching on, during heavy
usage or coming out of sleep mode.
White Filter LED (Classic only)
White filter LED off
This indicates the filter is operating
within its normal specified lifespan.
White filter LED flashing slowly
The light will flash slowly when the
filter is due for replacement and the
LCD will show "Filter Change". Refer
to chapter "Replacing the filter".
Note: For the Arc taps the need for
a filter replacement is indicated by
cyclically flashing all the LEDs in all
three colours.
24
White filter LED