Filter Maintenance; Water Filter - clage Zip HydroTap G5 BCS 20 Gebrauchsanleitung

LCD Screen Operation - Section E
E Info & Logs
INFO & LOGS
!
Filter System
Logs Faults
ABOUT SYSTEM
Title
Module:
App. revision:
Serial No:
Product No:
Calibration:
50L Filtered:
Wi-Fi:
MAC Address:
LCD Screen Operation - Section H
H Service
Caution must be observed when changing any settings within the
Service Menu as any changes may affect the normal operation of
the unit. This can only be done by a technician. Please contact the
Clage after sales service for further assistance.

Water Filter

The Zip HydroTap notifies when filter replacement is due. If you
notice one of the following, you will need to change the filter.
> The Change Filter LED will flash white once a second and remain
so until reset. The filter status light is located below the levers on
the tap head assembly (Classic).
> All LEDs of the tap flash approx. every 10 seconds in all three
colours (Arc / Celsius Arc).
> The filter percentage will show 0% on the Home screen.
Note: Replace the filter after a non-use of more than two months,
even if the change interval has not yet been reached!
Note: Depending on local water quality conditions and usage, the
filter may require changing anywhere from 500 Ltrs to 10000 Ltrs.
You may also need to replace the filter if you notice unpleasant
odours or tastes.
12:12 PM
i
!
Recent About
Faults System
12:12 PM
Info
BCS100
017-H5v0.1.xx
0000000000000
H500xx000AU
N/A
N/A
BS 0.00 FW 0.00
00:00:00:00:00:00

Filter Maintenance

Here you can view all filter chang-
es, logged system errors and
current error messages.
The system info gives you an
overview of the serial number,
model and other details of your
system.
42