clage Zip HydroTap G5 BCS 20 Gebrauchsanleitung Seite 30

Tap LEDs (Touch-Free excluded)
Blue Chilled Water LED
On all the time
This indicates that the chilled water is ready.
Flashing slowly
This indicates that the temperature of chilled water is not within the
set range.
When the chilled water is at the set temperature, the light will stop
flashing. This could take several minutes.
During heavy usage, the temperature can rise out of this range.
White Filter LED (Classic only)
White filter LED
White filter LED off
This indicates the filter is operating
within its normal specified lifespan.
White filter LED flashing slowly
The light will flash slowly when the
filter is due for replacement and the
LCD will show "Filter Change". Refer
to chapter "Replacing the filter".
Note: For the taps Arc and Celsius
Arc the need for a filter replacement
is indicated by cyclically flashing all
the LEDs in all three colours.
30