Cleaning And Maintenance; Troubleshooting - cecotec CHOPBEAT 1500 TITANBLACK GLASS Bedienungsanleitung

Ingredients Recommended max.
amount
Vegetables 300g
Garlic 300g
Pepper 200g
Peanut 200g

5. CLEANING AND MAINTENANCE

- Disconnect the appliance from the power supply and allow it to cool down before cleaning.
- Use a soft, damp cloth to clean the product's surface. Do not immerse the motor in water.
- Do not immerse the appliance in water or other liquid.
- Do not use abrasive scouring pads, powders or cleaners.
- Wash the removable parts with soap and warm water. Rinse well and let dry.
- The motor is not dishwasher-safe, but the parts which do not have electrical components
are.
- The cutting edges of the blades are very sharp, clean them carefully.
- Dry the device and components before assembling them back.

6. TROUBLESHOOTING

Problem
The device does not work.
Bad smell comes from the
motor.
The device stops operating
suddenly.
CHOPBEAT 1500 TITANBLACK GLASS/STEEL/GLASS&STEEL
Ingredients
Bread
Onion
(quartered)
Pork (20mm
pieces)
Beef (20mm
pieces)
Cause
The lid is not in place.
The motor is new. It is
completely normal.
The voltage is too low.
The overheating-protection
system started working.
ENGLISH
Recommended max.
amount
2 pieces
300g
300g
300g
Solution
Check the lid and cover it
correctly.
If the device has been used
several times and it still
emits that bad smell, contact
Cecotec technical support
service.
Check the voltage level.
Let the device rest for 20-30
minutes.
33