Bosch AQUATAK 110 Bedienungsanleitung Seite 14

F016 L70 372 - GB Seite 2 Donnerstag, 6. Oktober 2005 9:35 09
Product Specification
Power washer
Part number
Rated power
Supply Temperature max.
Supply rate min.
Supply pressure max.
Working pressure
Max. Operating pressure
Flow rate
Detergent Bottle or Tank
Detergent capacity
Weight
Protection class
Serial Number
Intended Use
The product is intended for cleaning areas and objects
outside the house, tools, vehicles and boats. Drainage
pipes can be unclogged and rust or paint coatings can
be removed, if the appropriate accessories such as
cleaning agents approved by Bosch are used.
Intended Use is related to operation within 0 °C and
40 °C ambient temperature.
This product should not be used for professional
use.
Introduction
This manual gives instructions on the correct as-
sembly and safe use of your machine. It is important
that you read these instructions carefully.
When fully assembled the machine weighs approxi-
mately 7.0 kg. If necessary, obtain assistance to re-
move from packaging.
Delivered Items
Carefully remove the machine from its packaging
and check that you have all the following items:
– Power washer
– Power gun/high pressure hose
– Detergent nozzle and bottle
(AQUATAK 110 only)
– Vario-jet-fan power lance (red colour coded)
– Roto power lance (red colour coded)
– Inlet Connector
– Wash Brush
(AQUATAK 110 PLUS/115 PLUS only)
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
14 • F016 L70 372 • TMS • 15.09.05
AQUATAK 110 AQUATAK 110 PLUS
3 600 H76 C.. 3 600 H76 D..
[W] 1 600 1 600
[°C] 40 40
[l/h] 17 17
[bar] 1.5 – 6.0 1.5 – 6.0
[bar] 100 100
[bar] 110 110
[l/h] 360 380
Bottle Tank
[l] 0.5 0.75
[kg] 7.0 7.0
/ II
See serial No 11 (rating plate) on product.
Operating Controls
1 Trigger safety lock
2 Trigger
3 Power gun
4 Vario-jet-fan power lance
5 High pressure hose
6 Detergent nozzle and bottle
7 Roto power lance
8 Inlet Connector
9 Detergent Tank
10 Main switch
11 Serial Number
Not all of the accessories illustrated or described are
included as standard delivery.
Warning! Switch off, remove plug from mains
before adjusting, cleaning or if cable is cut,
damaged or entangled.
Electrical Safety
Your machine is double insulated for safety and re-
quires no earth connection. The operating voltage is
230 V AC, 50 Hz (for non-EU countries 220 V, 240 V
as applicable). Only use approved extension cables.
Contact your Bosch Service Centre for details.
If you want to use an extension cable when operat-
ing your high pressure washer, only the following ca-
ble dimensions should be used:
English - 2
AQUATAK 115 PLUS
3 600 H76 E..
1 700
40
17
1.5 – 6.0
105
115
380
Tank
0.75
7.0
/ II / II
(AQUATAK 110 only)
(AQUATAK 110 PLUS/115 PLUS only)
For Your Safety
2
1.5 mm – max length 20 m
2
2.5 mm – max length 50 m