Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10. Operate the appliance with 220 ~ 240 V / 50 Hz / AC only. All
connections and energy-leading components must be replaced by an
authorised professional.
11. Do not use a socket board or a multi socket when connecting the
appliance to the mains.
12. Never place portable multiple sockets or portable power supplies
behind the appliance. RISK OF FIRE!
13. Do not connect the appliance to an energy saving plug (e.g. Sava Plug)
and to inverters which convert direct current (DC) into alternating
current (AC), e.g. solar systems, power supply of ships.
14. A dedicated and properly grounded socket meeting the data of the plug
is required to minimise any kind of hazard. The appliance must be
grounded properly.
15. Always check that the power cord is not placed under the appliance or
damaged by moving the appliance.
16. The technical data of your energy supplier must meet the data on the
model plate of the appliance.
17.
18. Do not modify the appliance.
19. Turn off the power before you install the appliance and before you
connect it to the mains. RISK OF FATAL ELECTRIC SHOCK!
20. Disconnect the appliance from the mains before you clean or maintain
it. RISK OF ELECTRIC SHOCK!
21. Remove possible dust accumulation at the power plug, at the safety
power socket and at all plug connectors regularly. RISK OF FIRE!
22. Keep the cord away from heated surfaces.
23. The power plug must always be accessible after installation.
24.
25.
26. Do not install the appliance in a place where it may come in contact
with water/rain; otherwise, the insulation of the electrical system will be
damaged.
27.
28. Do not use any steam cleaners to clean or defrost the appliance. The
steam can get into contact with the electrical parts and cause an
electrical short. RISK OF ELECTRIC SHOCK!
Werbung
