Data Transmission To A Pc; Charger And Battery (B) - Rothenberger Rocam Mini Hd Bedienungsanleitung

Settings:
4.8

Data transmission to a PC

 Switch on the wifi function over the system settings of ROCAM mini HD
The SD card of the ROCAM mini HD must be inserted!
 Switch on the wifi function on the PC and connect with the wireless network „roc-
am_hotspot". The network security key required to make the connection is: „letrocamin"
 Open the respective browser on the PC and enter the IP address of the ROCAM mini HD
http//192.168.5.1 eingeben.
One is now automatically connected with the existing ROCAM mini HD directories and can view
the desired pictures and videos.
Proceed as one would normally to save the one or the other on the PC.
4.9 Charger and battery
Overview:
Battery pack
1
Sliding seat
2
Operation display
3
Start of operation
Before plugging in, check to see that the rated mains voltage and mains frequency,
as specified on the rating label, match your power supply!
Devices such as this one, which generate direct current, may have an effect on basic residual-
current circuit breakers. Use type F or better, with a release current of max. 30 mA.
Before commissioning the charger, ensure that the air slots are free. Minimum
distance to other objects is 5 cm/ 2"!
Self-test:
 Insert mains supply plug.
The warning display (4) and the operating indicator (3) light up one after the other for approx. 1
second and the installed fan runs for approx. 5 seconds.
Battery pack:
Charge the battery pack before use (1).
If performance diminishes, recharge the battery pack.
The ideal storage temperature is between 10°C / 50° F and 30°C / 86° F. The permissible stor-
age temperature is between 0°C and 50°C / 32° - 122° F.
Li-ion battery packs have a capacity and signal indicator: (6)
Close settings menu
scroll up / scroll down
Warning display
4
Capacity indicator button
5
Capacity and signal indicator
6
ENGLISH
Self leveling on/off
Wi-Fi connection on/off
Hotspot on/off
Bluetooth connection on/off
.
(B)
23