Bosch PFS 3000-2 Originalbetriebsanleitung Seite 22

22 | English
(25) Sliding switch for switching on/off and for air flow
control
(26) Air filter cover
(27) Cleaning brush
(28) Elastic band (hose holder)
(29) Hose port (base unit)
(30) Accessory compartment
(31) Air filter
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Fine-spray system
Article number
Rated power input
Spraying capacity
Required time for application of
2
paint on 2 m
Container capacity for spray
material
Length of air hose
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/Vibration Information
Noise emission values determined according to
EN 62841-1.
Typically, the A-weighted sound pressure level of the power
tool is 80 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-1:
2 2
a < 2.5 m/s , K = 1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
1 609 92A 84D | (12.07.2022)
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
u
u
PFS 3000-2
3 603 B07 1..
W 650
Connecting the Air Hose (see figures A1–A3)
ml/min 300
– Open the elastic band (28) and completely unwind the air
min 1
Connecting the base unit:
ml 1000
– Insert a bayonet lock (20) of the air hose securely into the
m 2
kg 3.3
– Turn the bayonet lock a quarter turn clockwise.
Connecting to the spray gun:
/ II
– Insert the second bayonet lock (20) of the air hose se-
– Turn the bayonet lock a quarter turn clockwise.
Note: Remove the air hose (19) before pouring in spray ma-
terial (quarter turn of the bayonet lock (20) anticlockwise;
pull the bayonet lock (20) out of the port (9)).
Changing the Nozzle Cap (see figures B1–B2)
The fine-spray system is supplied with two nozzle caps:
Paint
Delivery condi-
tion
Application
Note: Check the spray material by stirring it before selecting
the nozzle cap. Thin-viscosity material (e.g. wood paint) can
be sprayed better with the grey nozzle cap (11). Thick-vis-
cosity material (e.g. wood lacquer or wall paint) can be
sprayed better with the white nozzle cap (10).
– To change the nozzle cap, unscrew the cap nut (3).
– Pull off the air cap (2).
– Unscrew the mounted nozzle cap.
Pull the plug out of the socket before carrying out any
work on the power tool.
Ensure that the spray gun and base unit are as-
sembled completely and with all seals. Only this will en-
sure the function and safety of the fine-spray system.
Ensure that a nozzle cap that was delivered with the
spray gun is fitted. Only this will ensure the function and
safety of the fine-spray system.
hose (19).
holes in the base unit port (29) according to the arrow
marks.
curely into the holes in the spray gun port (9) according
to the arrow marks.
Nozzle cap
(10)
White
Mounted
"Wall"
(11)
Grey
In the accessory
compartment (30) un-
der the air filter
cover (26)
"Wood"
Bosch Power Tools