Product Description And Specifications; Intended Use; Product Features - Bosch PFS 3000-2 Originalbetriebsanleitung

Symbols and their meanings
nishes, primers, clear lacquers
and oils
Choose the grey nozzle
cap (11) for the "wood" applic-
ation
Step 1:
Choose the correct nozzle
cap
Select setting 1, 2 or 3 on the
thumbwheel (4) for the "wood"
application
Step 2:
Setting the spray material
quantity
Set the "wood" application on
the sliding switch (25)
Step 3:
Setting the air flow
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended for spraying all common paints:
Emulsion and latex paints (wall paints), solvent-based and
water-dilutable (recommended) lacquers, varnishes,
primers, impregnations, clear lacquers (ALLPaint), oils and
water.
The power tool is not suitable for use with caustic solutions,
wood stains, acidic coating materials, disinfectants, pesti-
cides and house paints.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Spray gun
(2) Air cap
(3) Cap nut
Bosch Power Tools
Detailed description
(see "Changing the Nozzle Cap
(see figures B1–B2)",
page 22)
Choose the white nozzle
cap (10) for the "wall" applica-
tion
(see "Setting the spray mater-
ial quantity (see figure J)",
page 24)
Select setting 3, 4 or 5 on the
thumbwheel (4) for the "wall"
application
(see "Setting the Air Flow
(see figure D)", page 24)
Set the "wall" application on
the sliding switch (25)
(4) Thumbwheel for spray material volume
(5) Trigger switch
(6) Lock ring
(7) Container for spray material
(8) Spare container for spray material
(9) Hose port (spray gun)
(10) Nozzle cap (white: For "wall" application)
(11) Nozzle cap (grey: For "wood" application)
(12) Filling sieve
a)
(13) Transfer bucket
(14) Nozzle needle
(15) Container seal
(16) Suction tube
(17) Ventilation hole
(18) Paint channel
(19) Air hose
(20) Bayonet lock
(21) Base unit
(22) Carrying strap
(23) Carrying handle
(24) Pin
English | 21
a)
1 609 92A 84D | (12.07.2022)