Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
This product is in conformity with the:
E/ECE/324
E/ECE/TRANS/505 Regulation No. 116 >>
The remote controls and transmitters meet all the requirements for the type of product required by the rules of the R &
Telecoms TTE5/99/05/CE through the use of standards published in the Official Journal of the European community:
Test radio :
EN 300 440 -1/-2
Electromagnetic Compatibility:
EN 301 489 -1/-3
Electrical Safety:
The installation certificate of the alarm, included in this instructions, must be properly filled in every section and it will
be part of the documentation of the vehicle.
It is required to write the homologation number on the installation certificate to complete the
conformity with the directive.
Tension of Power
Absorption of Armed Alarm
Max Current blinkers relay
Additional modules output
CNA alarm systems are very sophisticated and highly reliable devices.
Paying attention about some points it is possible to prolong the life time and increased the reliability.
VEHICLE WASHING: if the vehicle will be washed with high-pressure devices (hydro beam or similar), it is necessary
to protect the alarm before beginning the washing. In case of water's infiltrations caused by use of hydro beam, the
guarantee will lapse.
GENERAL MAINTENANCE: All the operations to repair the alarm must be performed by CNA Assistance Centers. The
tampering of the alarm by personal not qualified can jeopardize the device
working and the safety of the vehicle.
The selection of a good installer is recommended. The list of installers can be found on the website www.cna-sas.it.
This product may contain substances that can be hazardous to the environment or to human health if it is not disposed of properly.
We therefore provide you with the following information to prevent releases of these substances and to improve the use of natural
resources. Electrical and electronic equipments should never be disposed of in the usual municipal waste but must be separately
collected for their proper treatment. The crossed-out bin symbol, placed on the product and in this page, remind you of the need to
dispose of properly the product at the end of its life. In this way it is possible to prevent that a not specific treatment of the
substances contained in these products, or their improper use, or improper use of their parts may be hazardous to the environment or to
human health. Furthermore this helps to recover, recycle and reuse many of the materials used in these products. For this purpose the
electrical and electronic equipment producers and distributors set up proper collection and treatment systems for these products. At the end of
life your product contact your distributor to have information on the collection arrangements. When buying this product your distributor will
also inform you of the opportunity to make free with another device at the end of life condition that is of equivalent type and has fulfilled the
same functions of the product purchased, or if the size is not larger than 25 cm, WAEE can be made without obligation to purchase the product
equivalent. A disposal of the product different from what described above will be liable to the penalties prescribed by the national provisions in
the country where the product is disposed of. We also recommend you to adopt more measures for environment protection: recycling of the
internal and external packaging of the product and disposing properly used batteries (if contained in the product). With your help it is possible
to reduce the amount of natural resources used to produce electrical and electronic equipments, to minimize the use of landfills for the disposal
of the products and to improve the quality of life by preventing that potentially hazardous substances are released in the environment.
D
e
c
l
a
r
a
t
i
o
n
s
o
f
c
o
n
f
o
r
D
e
c
l
a
r
a
t
i
o
n
s
o
f
c
o
n
f
o
r
Rev.2/Add.115
EN 60950-1
Technical features
11V – 15V
Alarm timing
≤ 3,5 mA
Central Unit size
8A + 8A
Weight
Frequency
100 mA
Working temperature
Alarm maintenance
List of installers
Environmental information
HPS 844N rev.02 09/17 pag. 24 di 48
m
i
t
y
m
i
t
y
>30 sec.
mm
87x62x31
80 gr.
2.4 GHz
-40°C / +85°C
Werbung
Inhaltsverzeichnis
