Display Brightness; Language; Factory Reset - Nabo Dab Easy Bedienungsanleitung

9. SYSTEM SETTINGS
[DD-MM-YYYY] (day, month, year)
[MM-DD-YYYY] (month,day, year)
To adopt the change press the Select button.
>

9.4 Display brightness

You can adjust the display brightness for both operation and stand-
by mode (only available when the radio is connected to the power
main).
In the submenu [System] use the button <Tune or Tune> to select
>
[backlight] and press Select.
Use the <Tune or Tune> and Select buttons to choose one of
>
following functions:
[On level] controls the brightness in the normal, switched-on state.
You can choose between [High], [Medium] and [Low] brightness levels.
Use the <Tune or Tune> buttons to choose a
>
brightness level and press the Select button to store you setting.
[Dim level] adjusts the brightness in standby mode. You can
choose between [High], [Medium] and [Low] brightness levels.
Use the <Tune or Tune> buttons to choose a brightness level and
>
press the Select button to store you setting.
When set to [Off], the display always remains active with the On
setting.

9.5 Language

In the submenu [System] use the button <Tune or Tune> to select
>
[Language] and press the Select button.
Use the <Tune or Tune> buttons to choose one of the available
>
languages and confirm your selection by pressing the Select
button.

9.6 Factory Reset

If you change the location of the device, e.g. when moving house, the
stored stations may no longer be receivable. In this case, by resto-
ring the factory settings, you can delete all stored stations and then
start a new station scan.
73
E
DAB Easy