Orienting The Telescopic Antenna; Using Headphones - Nabo Dab Easy Bedienungsanleitung

5. OPERATION AND FIRST USE
Make sure that the operating voltage of the power supply corres-
ponds to the local mains voltage before plugging it into a wall outlet.
After the first connection to the power supply, 'NABO' will be
displayed.
Following that, you may select the operating language.
To do so, select one of the available languages with the <Tune or
Tune> buttons and confirm your selection by pressing the Select
button.
E
After that, a station search via DAB+ is performed for the first time.

5.2.3. Orienting the telescopic antenna

The number and signal quality of the stations to be received
depends on the reception conditions at the setup site. Excellent
signal reception can be achieved with the telescopic antenna.
> Straighten the telescopic antenna and extend it lengthwise.
The exact alignment of the telescopic antenna is often important,
especially in the peripheral areas of DAB+ reception.
You can quickly find the location of the nearest transmitter mast
online, for example at www.dabplus.de.
Start the first search near a window in the direction of the transmit-
ter mast. In the case of poor weather, DAB+ reception may be limi-
ted. Do not touch the telescopic antenna while playing a station. This
may negatively impact the reception and lead to interruptions.

5.2.4. Using headphones

Hearing loss!
Do not listen to the radio at high volume when using headphones.
This may lead to permanent hearing loss. Before using headphones,
set the device volume to minimum. Only use headphones with a 3.5
mm plug.
Operating Manual 60