Automatic Time Update; Set The Time Format; Set The Date Format - Nabo Dab Easy Bedienungsanleitung

9. SYSTEM SETTINGS
> Proceed as described above to set the date.
After all settings have been made and the Select button was
>
pressed for the last time, [Time saved] appears in the display.

9.3.2 Automatic time update

In this submenu you can specify whether the time is to be automa-
tically updated via DAB+ or FM (UKW) or entered manually (section
9.3.1).
In the submenu [System] use the button <Tune or Tune> to select
>
[Time] and press the Select button.
Use <Tune or Tune> to select [Autom. update] and press Select.
E
>
Use the <Tune or Tune> and Select buttons to choose the
>
following options:
[Update all] (update via DAB+ and FM) [Update by DAB] (Update
only via DAB+) [Update by FM] (Update only via FMW) [No update]
(Time/date must be entered manually, see section 9.3.1).

9.3.3 Set the time format

You can activate the 12- or 24-hour format in the 'Set 12/24-hour
time' submenu.
> In the Clock/time submenu, select [Set 12/24 Hrs] with the
<Tune or Tune> buttons and press Select.
Use the <Tune or Tune> buttons to choose one of the following
>
options:
[set it at 24 hrs.]
[set it at 12 hrs.]
To adopt the change press the Select button.
>

9.3.4 Set the date format

In the Clock/Time submenu 'set date format' you can set the format
for displaying the date.
> In the Clock/time submenu, select [Set 12/24 Hrs] with the
<Tune or Tune> buttons and press Select.
Use the <Tune or Tune> buttons to choose one of the following
>
options:
Operating Manual 72