Swiss Pro+ SP-AF1450.5 Bedienungsanleitung Seite 5

Menu setting in default (You may make adjustment according to the individual taste.)
BEFORE USE
First read all instructions before use and retain the manual for later reference. Only plug
this appliance into an earthed socket. Before first use, remove the packing materials. Clean
the basket and frying grill. (See "CLEANING AND MAINTENANCE") Wipe inside and outside
of the appliance with a soft cloth. Make sure that the electrical parts remain dry.
This appliance heats food at all directions and most of the ingredients do not need any oil.
Operate the appliance before first use for approximately 10 minutes in order to burn off
production residues. Make sure there is good ventilation. The appliance may emit some
smoke and a characteristic smell when you switch it on for the first time. This is normal and
will stop soon.
Note: Always use the frying grill with the silicone cases attached. They will help to stabilize
the frying grill in the basket during cooking.
USE
1.Place the appliance on a dry, stable and heat-resistant surface.
2.Since the appliance becomes hot during use, make sure that it is not too close to other
objects.
3.Pull out the basket from the appliance by the basket handle. Put the frying grill into the
basket.
4.Place the ingredients into the basket. Slide the basket into the appliance. Make sure they
are placed correctly and closed completely. Otherwise the appliance will not work.
Caution: Do not touch the basket during use or after use in short time as it gets very hot.
Only hold the basket by the handle.
5.Connect the power plug to a suitable outlet. The machine sends out one beep sound and
enters into standby. Press the on/off button, the control panel is displayed.
6.Press the temperature adjustment button "+" to set your desired temperature
(80°C to 200°C). Press the timer adjustment button to set desired time (1 - 60 minutes). You
can also long press the adjustment button for rapid adjustment.
7.You can also press the menu button to directly choose the cooking functions in the menu.
If you wish to adjust the time and temperature a little, please make adjustment as step 6.
The selected food icon in the menu will flash. If you need to change the menu selection when
the appliance is working, you need to first press the on/off button to make a pause.
8.Press the on/off button once; the machine starts working and the on/off button flashes.
The digital display shows the set temperature and time. You can press the on/off button
again to make a pause. If there is no operation for about 1 minute in the pause state, the
machine will automatically enter into standby with 3 beep sounds.