Bosch GCM 12 SD Professional Originalbetriebsanleitung Seite 26

OBJ_BUCH-1130-003.book Page 26 Friday, December 5, 2014 12:37 PM
26 | English
Symbols and their meaning
 Danger area! Keep hands, fingers or
arms away from this area.
When transporting the machine, hold it only at the locations
indicated.
1 609 92A 0XM | (5.12.14)
Symbols and their meaning
Observe the dimensions of
the saw blade. The hole di-
ameter must match the tool
spindle without play. Do
not use reducers or adapt-
ers.
Left column:
– Bevel angle range
Danger of crushes or contu-
sions! When transporting,
ensure that your fingers are
positioned around the
transport handle.
Indicates the individual
steps for adjusting the
handle.
Indicates the individual
steps for adjusting the
bevel angle.
Right column:
– Bevel angle range
45°– 0
Saw blade is inclined to the
0 – 45°
left Saw blade is inclined to
the right
– Bevel angle range
Complete tilting range of
the tool arm
Indicates the position of the
locking lever for locking the
tool arm and for adjusting
the bevel angle.
Do not dispose of power tools into house-
hold waste!
Only for EC countries:
According to the European Guideline
2012/19/EU for Waste Electrical and
Electronic Equipment and its implemen-
tation into national right, power tools that
are no longer usable must be collected
separately and disposed of in an environ-
mentally correct manner.
45°+
Bosch Power Tools