Bamix SliceSy Gebrauchsanleitung Seite 18

2. Working with the attachments (I)
Application: grates and slices raw and cooked vegetables (leek, tomatoes –
halved or quartered, cucumbers, radishes, carrots etc), fruits, cheese etc.
Insert the discharge plate (B) into the bowl (A).
Make sure that the four notches of the plate (marked with arrows) match the
protrusions of the bowl (fig. J).
Before inserting the discharge plate, make sure there is no food left in the
bowl.
Mount the desired attachment (I) into the opening of the attachment holder (D) and
put the attachment holder on the spindle of the discharge plate (B) (fig. I).
Important: Make sure that the attachment (I) is well-positioned in the
attachment holder (listen for the «click»).
The attachments (I) are very sharp! Be careful not to injure yourself when
handling them. Never leave the attachments within reach of children.
Place the transmission unit (E) onto the bowl (A) to close it.
Put your bamix
®
vegetables into the feed tube (G).
Tip: You get better results if the feed tube is full along its entire width.
Important: Do not press the food or the pusher (H) too hard. The pressure
of one finger should be enough to do the job (and will extend the life of
your SliceSy
Never insert hard objects (such as bones, spoons etc.) into the feed tube (G).
The patented discharge plate (B) makes it very easy to take the finished food out
of the bowl (A) (see fig. K).
18
802.020_SliceSy_Gebrauchsanleitung_20201028.indd 18 802.020_SliceSy_Gebrauchsanleitung_20201028.indd 18
vertically on the transmission shaft (F) and fill fruits or
).
®
28.10.20 16:37 28.10.20 16:37