Temperature Unit; Temperature Range; Alarm Mode - LaserLiner ThermoCamera HighSense Bedienungsanleitung

14.1
Measure Settings: Temperature unit

Temperature unit

Celcius (°C)
Fahrenheit (°F)
Kelvin (K)
14.2
Measure Settings: Temperature range

Temperature range

-20~150°C
0~650°C
14.3
Measure Settings: Alarm mode

Alarm mode

OFF
Above MAX alarm
Below MIN alarm
Interval alarm
ThermoCamera HighSense (Pro)
The unit of temperature can be set in this menu.
The default setting for the temperature range can be
selected in this menu. Choose between two ranges:
-20 - +150 °C (optimum for indoor and outdoor
thermal imaging of buildings) 0 - +650 °C (optimum
for industrial applications)
The upper and low alarm levels can be activated
in the Alarm Mode menu.
The upper and lower alarm levels must be activated
to use the Alarm Range function.
The Alarm Range is defined by the threshold values
for the upper and lower alarm levels. The acoustic
alarm sounds if a temperature is measured which is
within these two threshold values, for example when
the temperature is 35 °C and the upper alarm is set
at 40 °C and the lower alarm at 30 °C.
45
EN