LaserLiner ThermoCamera HighSense Bedienungsanleitung Seite 32

Alarm: Set the alarm above and below the specified temperature level.
Parameter: Before each use, check the relevant parameters for infrared measurement or adjust
them to the specific measuring situation to ensure accurate measurements. In doing so, please pay
particular attention to the general parameters with respect to the emissivity coefficient, distance to
target and ambient conditions.
Measuring device: Set the measurement points and areas.
Image mode: Select image mode from IR Thermal, MIX Image, Visible image, Auto Fusion
and Zoom.
Colour palettes: Several colour palettes are available to display the infrared temperatures.
Settings: Set language, temperature units, date, time, etc., display the WLAN connection, select
CustomApps, automatic switch off and display information about the device.
6
Alarm: Below MIN / above MAX alarm
Below MIN alarm
Alarm
7.0
Parameter: Ambient temperature
Ambient Temperature
32
EN
The alarm threshold values above and below the
specified temperature levels can be set in this menu.
Instructions for activating the alarm are provided in
Section 14.3.
Influences measurements taken with the thermal
imaging camera are affected by the ambient temperature.
This parameter compensates the influence of the
ambient temperature on the measurement.
This can be set between 0 °C and 50 °C.