LaserLiner ThermoCamera HighSense Bedienungsanleitung Seite 36

8
Set measurement
Center point: Measure the temperature in the centre of the image area.
Measure point: Measure the temperature at a manually determined point. A maximum
of three measuring points are available.
Hot/Cold: Measure maximum and minimum temperature.
Area: Measure the temperature in a manually determined area. A maximum of three measuring
areas are available.
Line: Measure the temperature along a horizontal or vertical line in the display. Both lines can
be moved. Particularly small temperature differences along the line of measurement are indicated
graphically by the line display.
Delete: Delete all measuring settings.
9.0
Set image
36
EN
There are five different image modes for display:
IR Thermal, MIX Image, Visible image, Auto Fusion,
Zoom.