Usb Mode - LaserLiner ThermoCamera HighSense Bedienungsanleitung

12
Settings
13.0
Device settings: USB Mode

USB mode

PC Connection
PC Camera
13.1
Device settings: Brightness
Brightness
42
EN
Device settings
Measure Settings
CustomApp parameter
Reset
The data recorded by the thermal imaging camera can
be transferred to a PC in USB mode. To allow several
people to view the image on the camera at the same
time, the PC can be used for live transmission. The USB
drive must be correctly removed from the PC after use
to avoid read errors on the PC.
The screen brightness can be adjusted using the slider.
Settings