Control Panel - IBO MAGI 2 25-40/180 Betriebsanleitung

CONTROL PANEL

Control panel elements
Function description:
AUTO/ECO function switch for automatic pump parameter selection depending on
the CO system status
Operating mode change button
Operation index acc. to the proportional pressure characteristics
Operation index acc. to the constant pressure characteristics
Current consumption in Watt display
Operation index acc. to constant rotary speed
Changing mode button 40-60
Displayed error codes
After the power supply is switched on, all of dispays will flesh on after which the pump will enter the last running
mode before it is switched off. Pressing the main switch button once changes the mode by the following order:
AUTO,LPP, HPP, LCP, HCP, 1, 2, 3
For example, if the pump is operating in CP1 mode, pressing the button
CP2 mode in the list. Entry into a given mode is signaled by highlighting the appropriate indicator on the panel.
Symbol:
AUTO
LPP, HPP
LCP, HCP
1, 2, 3
once will cause switching to the next
17