Technical Data - Electrolux SG181N Benutzerhandbuch

14 www.electrolux.com

9. TECHNICAL DATA

Dimension
Rising Time
Voltage
2
1
A
B
Height
Width
Depth
• Unscrew the upper pin and screw it on
the opposite side.
• Refit the door.
• Make sure the edge of the door is par-
allel with the edge of the top.
• Unscrew the pin (A) and screw it on the
opposite side.
• Remove the cap (B) and position it on
the opposite side.
• Screw the lower hinges.
• Refit the plinth.
• Stand the appliance upright.
• Fit the handle on the opposite side and
put the plastic caps (contained in the
instructions bag) in the free holes.
• Do a final check to make sure that:
– All screws are tightened.
– The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the nat-
ural fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The Af-
ter Sales Service specialist will carry out
the reversibility of the doors at your cost.
1540 mm
595 mm
658 mm
30 h
230-240 V