Mounting Or Removing The Armrests; Adjusting Anti-Tipping (When Provided) - Vermeiren D200 Gebrauchsanweisung

3.3

Mounting or removing the armrests

CAUTION
 Keep fingers, buckles and clothes away from the bottom side of the armrest.
The armrests of the wheelchair can be mounted by following instructions.
To open and remove the armrest:
1. Press lever (3) and pull the front of the armrest upwards.
2. Fold the armrest backwards.
3. To remove the armrest, press button (4) and pull the rear of the armrest from tube hood (1).
4
3.4

Adjusting anti-tipping (when provided)

Risk of injuries
1. Mount the rear tube of the armrest in tube hood (1).
2. Make sure the armrest clicks in the locking mechanism.
3. Fold the armrest forward.
4. Click the front tube of the armrest in tube hood (2).
1
CAUTION
 For D200 30°: Anti-tipping should always be installed and
lowered.
Adjust the height of the anti-tipping in 7 positions (range 120 mm:
steps 20 mm):
1. Loosen the star knob (1) a little bit.
2. Move the tube of the anti-tipping in the desired height.
3. Secure the star knob (1).
4. Make sure that the anti-tipping is firmly secured.
Risk of injuries
9
EN
D200, D200 30°
2022-05
Using your wheelchair
NL
3
2
1