Edesa LP 55-65 Bedienungsanleitungen Seite 18

TROUBLE
The lights of switches "B", "D" do not
come on
The tank does not fill
Upon reaching the set level, water
continues to flow in
Failure to reach the temperature in the
tank.
Insufficient washing
Insufficient rinsing.
Insufficient rinsing temperature.
17
TROUBLESHOOTING
POSSIBLE CAUSES AND REMEDIES
A) Check that the wall-mounted switch is on and that the
fuses have not blown.
B) Check that the bulbs have not blown.
A) Check that there is water from the mains and that the
on/off cock is open.
B)Check that the pressure switch is not out of calibration
or broken.
C)Check that the filling solenoid valve is in proper
working order.
D)Check that the overflow is present and properly
inserted into its seat.
A)Check that the pressure switch is not out of calibration
or broken.
B)Check that the solenoid valve is in proper working
order.
A)Check that the thermostat is not out of calibration,
broken or incorrectly set.
B)Check that the contactor coil for the tank heating
element is not broken.
C)Check that the tank heating element is in proper
working order.
A)Make sure the detergent is of the correct type and in
the right amount (recommended by the manufacturer).
B)Check that the revolving arm nozzles are not clogged
by impurities.
C)Check that the temperature of the water in the tank is
65 ºC.
D)Check that the pump is working properly (direction of
rotation)
E)Check that the pump filter is not clogged by
impurities.
A)Check the water mains pressure.
B)Check that the nozzles are not clogged by scale.
C)Check that the solenoid valve is in proper working
order.
D)Check that the extra pump is in proper working order.
A)Check the thermostat is not out of calibration, broken
or incorrectly set.
B)Check if the safety thermostat has activated and if so
check the relative causes.
C)Check that the heating element is in proper working
order.
D)Check that the contactor coil for the boiler heating
element is not broken.