HOMCOM 800-116V70 Bedienungsanleitung Seite 9

Instruction for operation the control panel
1. Plug your ice-cream maker into the main power outlet, all the LED lights will be
on for 3 seconds, after that, the
"35:00", some of the lights in circle will be on. The program defaults to soft ice
cream function.
2.You can let the paddle work only first to blend the ice-cream material completely.
Press the "Stir" button
picture. It means the default time for paddle work is 5 minutes, you can press the
"Start/Stop" button to start/stop stirring, and also you can use the "TIME+"
"TIME-" button to change the paddle working time, one time is 3 minutes
If you don't need the paddle work first to blend the ice-cream material, just move
to the next step.
3.The default set is soft ice-cream function, the
the button to change to hard ice-cream function, press the
change to milkshake function, as the same way, press the
to stir function only.
4.Press the "START/STOP"
work according to the above setting program. Press the "START/STOP"
button for two seconds, you will stop the function.
During the compressor running, you can also press the Stir button to Start or
Stop the paddle rotating.
After starting to make the soft ice-cream, it will run according to the default time
varied with the ambient temperature. And you can press the "TIME+"
"TIME-" button to change the ice-cream making duration time according to
your personal taste.
EN
light will be on, LED display window will show
Milkshake
TIME+
,the LED display window will display like the following
Milkshake
TIME+
button to turn on the unit, the unit will start to
8
Soft Ice Hard Ice
cream cream
START
STOP
STIR
TIME-
Soft Ice Hard Ice
cream cream
START
STOP
STIR
TIME-
light is on. You can also press
button to change
or
button to
or