Leuze electronic BCL 900i Bedienungsanleitung Seite 18

4
LED indicators
READY Green
GOOD Green
TRIGGER Yellow
COM Yellow
STATUS Red
1)
POWER Green
1)
ETH 1 Yellow
1)
ETH 2 Yellow
1) Not shown, LEDs next to the M12 connections
5
Part number code
Please refer to the part number code for your device model.
Decommissioning, maintenance
CAUTION
 Do not open the device yourself under any circumstances! There is
otherwise a risk of uncontrolled emission of laser radiation from the
device. The housing of the BCL 900i contains no parts that need to
be adjusted or maintained by the user. If faults cannot be cleared, the
device should be switched off and protected against accidental use.
 Package the device for transport and storage in such a way that is
protected against shock and humidity. Optimum protection is
achieved when using the original packaging. Ensure compliance with
the approved environmental conditions listed in the specifications.
 Do not use aggressive cleaning agents such as thinner or acetone
for cleaning the device.
Operational readiness
Good Read - indicates successful reading
Reading gate active
Active communication on serial interface
Read status (No Read)
Supply voltage applied
Active communication Ethernet interface 1
Active communication Ethernet interface 2
EN
18