Husqvarna BMC 335 Bedienungsanweisung Seite 29

14. Install the drive belt (M) and the pulley (N) from the
kit.
M
15. Install the bushing (O) with the screw (P).
16. Install the scarifying drum.
17. Install the side cover.
1816 - 001 - 05.04.2022
18. Install the support plate.
19. Measure the drive belt tension in the center of the
N
O
P
20. If it is necessary, adjust the drive belt tension with
21. Tighten the nut (C).
drive belt span (A). Correct tension is 117 Hz.
B
C
the nut (B).
A
29