19. Install the drive belt cover (E) and the cover (D).
20. Set the switch for direction of rotation of the control
panel to clockwise (CW).
WARNING:
counterclockwise direction of rotation when
you use the product as a scarifier.
To change the product into a scarifier,
60 Hz
To change BMC 335, 60 Hz, into a scarifier, a kit with
special parts is necessary.
26
E
D
Do not use
1. Remove the support plate.
2. Remove the screws and washers from the side
cover.
3. Install the screws with washers in the adjacent holes.
1816 - 001 - 05.04.2022