Husqvarna BMC 335 Bedienungsanweisung Seite 12

1. Remove the support plate.
2. Remove the screws and washers from the side
cover.
3. Install the screws with washers in the adjacent holes.
12
4. Turn the screws to push the side cover off.
Note:
When the side cover is removed, the axle
hangs loose.
5. Install the empty diamond blade drum on the axle.
6. Install the spacers and diamond blades 1 at a time
on the axle until the end of the drum.
7. Put a minimum of 2 spacers on the axle after the last
diamond blade and install the locknuts.
1816 - 001 - 05.04.2022