Werbung
Verfügbare Sprachen
Verfügbare Sprachen
G.W 6.00kgs
Packing size: 400*400*520mm
Body by steel coated powder / kettle by stainless steel
CLEANING
General information
1- Turn off the plate and take off the supply plug before to clean the device.
Attention: the supply plug must be dried before operating again the device.
2- Wait until the device was cooled down than remove the pot (fig. 4b) and empty it.
3- Remove the inox pot from its flange taking care to the lid that will be released.
4- Clean the casing with a damp, soft cloth and a mild detergent. To avoid damages of electrical
parts, never drop water in aeration holes.
5- Use not abrasive clothes and detergents. Avoid the use of spray and other harsh cleaners as they
may stain or streak the device surfaces.
6- The lid, the liner and its flange can be cleaned in a washing machine.
Overview of parts
Werbung
