Maintenance - SCHUNK MLD-L Montage- Und Betriebsanleitung

7.1 Maintenance

Maintenance
02.00 | MLD-L | Montage- und Betriebsanleitung | en | GAS364815
NOTICE
With travel paths of less than 100 mm, run a full travel
lubricating stroke daily.
To ensure the operational safety of the module over a long period
of time, the operating personnel must carry out maintenance work
in specific intervals.
Weekly maintenance
(depending on degree of
contamination)
Every 2 to 4 weeks
Every 5000 km or at the
latest after 6 months
Maintenance and care
Rub the guide strips (1) with an
oil-soaked cloth.
Clean secondary part (2).
Relubricate the recirculating ball
bearings (3) with 0.5 g of grease.
79