Door; Cooling Fan - Atag ZX46 D-Serie Bedienungsanleitung

YOUR OVEN

Door

Cooling fan

EN 8
Rotisserie
The rotisserie comprises a spit with 2 clamps, a detachable handle and
a spit roast that fits in the centre of the oven.
The spit fits in the rotisserie motor in the back wall of the oven.
• Slide the deep baking tray in at level 1 to catch juices or fat.
• Slide one of the clamps onto the spit and then slide the meat you
wish to roast onto the spit.
• Place the spit roast in the central oven level with the 'v' shape to
the front.
• The handle can be screwed onto the blunt end of the spit to make
positioning the spit easier.
• Place the spit on the spit roast with the pointed end away from you.
Push gently until the spit fits in the rotisserie motor in the back wall.
The blunt end of the spit needs to fit in the 'v' shape. (The spit has
two notches, both of which need to be mounted on the oven door
side so that the spit stays in position. The notches also serve as a
grip for the handle.)
• The rotisserie motor starts running when a function with grill has
been started.
• Remove the handle prior to baking or roasting. You can then
reattach the handle to the spit to remove this from the oven easily.
• The door switches interrupt the operation of the oven when the door
is opened during use. The oven continues operating when the door
is closed.
• This oven has a 'Soft close door system'. When closing the oven
door, this system dampens the movement, from a certain angle, and
silently closes the oven door.
• The appliance is equipped with a cooling fan that cools the casing
and control panel.