Connecting Headphones - JVC AV28CH1EU Bedienungsanleitung

ADDITIONAL PREPARATION
Devices which can output the S-VIDEO Devices which can output the S-VIDEO
Devices which can output the S-VIDEO Devices which can output the S-VIDEO
signal (Y/C signal) such as a S-VHS VCR signal (Y/C signal) such as a S-VHS VCR
signal (Y/C signal) such as a S-VHS VCR signal (Y/C signal) such as a S-VHS VCR
Connect the device to an EXT terminal other than the EXT-1
terminal.
You can choose a video input signal from the S-VIDEO signal
(Y/C signal) and regular video signal (composite signal). For
details of how to operate the device, see "S-IN (S-VIDEO in-
put)" on page 19.
T-V LINK compatible VCR T-V LINK compatible VCR T-V LINK compatible VCR T-V LINK compatible VCR
Be sure to connect the T-V LINK compatible VCR to the
EXT-2 terminal. If not, the T-V LINK function will not work
properly.
Note:
• When connecting a T-V LINK compatible VCR to the
EXT-2 terminal, be sure to connect the Decoder to the
VCR. If not, the T-V LINK function may not work properly.
After you have registered TV channels to the Programme
numbers (PR), set the DECODER (EXT-2) function for the
Programme number (PR) to ON in order to unscramble a
scrambled TV channel. For details of operation, see "Us-
ing the DECODER (EXT-2) function" on page 28.

Connecting headphones

Connecting headphones Connecting headphones Connecting headphones
Connect the headphones with a stereo mini-jack (of 3.5mm in
diameter) to the headphone jack at the TV front panel.
Note:
• When you connect the headphones, the TV speakers is-
sue no sound.
Video/sound signal output from the Video/sound signal output from the
Video/sound signal output from the Video/sound signal output from the
EXT-2 terminal EXT-2 terminal EXT-2 terminal EXT-2 terminal
You can arbitrarily change over the output of the video/sound
signal from the EXT-2 terminal. It is useful when you want to
dub the video/sound from another device on the VCR con-
nected to the EXT-2 terminal. For details on how to do this op-
eration, see "DUBBING" on page 20.
TV output from the EXT-1 terminal TV output from the EXT-1 terminal
TV output from the EXT-1 terminal TV output from the EXT-1 terminal
The output of video/sound signal of a TV channel you are cur-
rently viewing is always output from the EXT-1 terminal.
Note:
• Changing over a Programme number (PR) also changes
over the TV output from the EXT-1 terminal.
• The video/sound signal from an EXT terminal cannot be
output.
• Teletext programmes cannot be output.
30
All manuals and user guides at all-guides.com