Elica NIKOLATESLA ONE Montage- Und Gebrauchsanweisungen Seite 67

Automatic hood mode with SNAP®
For information on how to make the connection between the
hood and SNAP®, see the manual supplied with SNAP® or
visit www.elica.com.
Note: SNAP® is an auxiliary extraction unit able to operate at
the same time as the hood.
To activate this function:
Briefly press (7) , the LED "
"SNAP" (21) will light up to indicate that the hood is working in
this mode.
The device can also be used in combination with a
Window sensor KIT (not supplied by the manufacturer).
Temperature Manager
" (18) and the LED
It identifies a suitable cooking level to slowly melt delicate products without
compromising their sensory characteristics (chocolate,
Melting
butter, etc.).
It identifies a suitable cooking level to allow to delicately keep the food at the
Warming
same temperature, without letting it boil.
It identifies a suitable cooking level to simmer food for prolonged periods.
Suitable to cook tomato sauces, meat sauces, soups, minestrone,
maintaining a controlled cooking level (ideal for bain-marie). It prevents the
food from spilling or sticking at the bottom of the pan, typical of these
Simmer
preparations.
Use this function after bringing the food to a boil.
If the Window sensor KIT is installed (only in the case of use
in EXTRACTOR mode), air extraction will halt every time the
window in the room, on which the KIT is applied, is closed.
• The KIT must be electrically connected to the device by
qualified and specialised technical personnel.
• The KIT must be certified separately in accordance with
the safety standards for the component and its use with
the device. Installation must be carried out in accordance
with current regulations for domestic systems.
PLEASE NOTE:
• the wiring of the KIT to be connected to the device must
be part of a certified safety extra-low voltage (SELV)
circuit.
• the manufacturer of this device declines all liability for
any inconvenience, damage or fires caused by defects
and/or problems associated with the malfunction and/or
incorrect installation of the KIT.
Description
65