Podcasts Mode; Operation - Sonoro STREAM SO-411 Bedienungsanleitung

10 Podcasts mode

10.1

Operation

Wi-Fi connection must be established first to use the Podcast (see chapters
"Performing initial setup" and "Network").
To access the
Podcast mode,
To tune to a
podcast,
To store a podcast in
the preset list,
To directly store a
podcast in the
preset list (1–5),
To recall a podcast
in the preset list,
To browse the station
information* (if
available),
*Podcast information (if available) includes: Artist and track name, Podcast
description, Codec and sampling rate, Playback buffer and date.
© sonoro audio GmbH 2022
Press MENU once, then press
remote control (or rotate the navigation knob) to
select the Podcast mode and then press OK to
confirm.
STREAM starts connecting to the previously
connected network and then the last listened
Podcast.
See chapter "Podcast list".
A maximum of 30 radio stations and podcasts
can be stored.
1. Press and hold
☆
displayed and [Save to Preset] is displayed.
+ ▬
2. Press or on the remote control (or rotate
the navigation knob) to select a preset station
number and then press OK to confirm.
Tune to a podcast and then press and hold a preset
station button (1–5) on the remote control to
directly store it in the preset list.
1. Press and the [Recall from Preset] is shown.
☆
+ ▬
2. Press or on the remote control (or rotate
the navigation knob) to select a podcast in the
preset list and then press OK to confirm.
Or, press preset station buttons (1–5) on the
remote control to access a stored preset station
(1–5).
Press INFO on the remote control repeatedly.
◄ ►
or on the
key until the preset list is
GB
71