Before First Use - Electrolux GA55SLICN Benutzerinformation

14 www.electrolux.com
AirDry is automatically activated with all
programmes other than
applicable).
The duration of the drying phase and the
door opening time vary depending on the
selected programme and options.
When AirDry opens the door, the display
shows the remaining time of the running
programme.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for at least 3 minutes,
the running programme
ends.

8. BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not put dishes in
the baskets.
After starting the programme, the
appliance recharges the resin in the
water softener for up to 5 minutes. The
washing phase starts only after this
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press
(if
2. Press
3. Press the on/off button to confirm the
procedure is complete. The procedure is
repeated periodically.
8.1 The salt container
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
CAUTION!
If children have access to
the appliance, we advise to
deactivate AirDry. The
automatic opening of the
door may pose a danger.
.
• The indicator
• The remaining indicators are off.
• The display shows the current
setting:
– = AirDry is deactivated.
– = AirDry is activated.
to change the setting.
setting.
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
still flashes.