Protecting The Environment; Technical Data - Black & Decker BDCROS18 Bersetzung Der Originalanweisungen

● The hook and loop fastening system sanding disc can be
easily removed by simply pulling it off. It can be reused
as desired.
@
Use
Warning! Let the tool work at its own pace. Do
not overload.
Switching on and off
● To switch the tool on, depress the on/off switch (2) at the
"I" position.
● To switch the tool off, depress the on/off switch (2) at
the"O" position.
Operation
Grasp the sander as shown in figure G and turn it ON. Move it
in long, sweeping strokes along the surface, letting it do
the work.
Pushing down on the tool while sanding actually slows the
removal rate and produces an inferior quality finish.
Check your work often. Sander is capable of removing
material rapidly especially with coarse paper.
@
Dust Collection (Fig. H, I)
Warning! Collected sanding dust from sanding
surface coatings (polyurethane, linseed oil, etc.)
can selfignite in sander dust bag or elsewhere and
cause fire. To reduce risk, empty bag frequently
and strictly follow sander manual and coating
manufacturer's instructions.
● To attach the canister to the sander, line up the grooves in
the canister (9) with the nubs (10) on the dust port.
● Slide the canister onto the dust port and turn the canister
clockwise to lock it in place as shown in Figure H.
● To remove, turn the canister counterclockwise and slide
the canister off.
● To empty the canister, remove it from the dust port
and dump the sanding debris into an appropriate trash
receptacle Figure I.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
@
regular cleaning.
Warning! Before performing any maintenance on
the tool, remove the battery from the tool. Unplug the
charger before cleaning it.
● Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
● Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
(original instructions)

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com

Technical data

Input voltage V
DC
Oscillations (no load)
min
Orbits (no load) min
Sanding base surface
mm
Weight kg
Battery
Voltage V
DC
Capacity Ah
Type
Charger
Input voltage V
AC
Output voltage V
DC
Current mA
L (sound pressure) 71.5 dB(A), Uncertainty (K) 3 dB(A)
pA
L (sound power) 82.5 dB(A), Uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN62841:
Vibration emission value (a
BDCROS18 H1
-1
-1
2
SSC-250040X
) 3.4 m/s , uncertainty (K) 1.5 m/s
2
h
English
18
12000
12000
12660
0.9
BL1518
18
1.5
H4
230
8 - 20
400
2
9