Protecting The Environment; Ec Declaration Of Conformity - Black & Decker BEW200 Bersetzt Von Den Originalanweisungen

visit our website at www.blackanddecker.eu
Item Description
Large detail sanding base (4).
Random orbit sanding base
(3).
Detail finger (6).
Hints for optimum use
For user comfort, the tool can be operated with one or
u
two hands (fig. L, M, N). Do not place your hands over the
ventilation slots.
Do not exert too much pressure on the tool.
u
Regularly check the condition of the sanding sheet.
u
Replace when necessary.
Always sand with the grain of the wood.
u
When sanding new layers of paint before applying
u
another layer, use extra fine grit.
On very uneven surfaces, or when removing layers of
u
paint, start with a coarse grit. On other surfaces, start
with a medium grit. In both cases, gradually change to a
fine grit for a smooth finish.
Consult your retailer for more information on available
u
accessories.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance on the tool,
remove unplug the charger before cleaning it.
Regularly clean the ventilation slots in your tool using a
u
soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new plug.
u
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.

Protecting the environment

Purpose
For medium to large
areas. The large detail
Products and batteries contain materials that can be recov-
base can be used to sand
into corners and to the
ered or recycled reducing the demand for raw materials.
edge of the workpiece.
Please recycle electrical products and batteries according to
For large areas. The
local provisions. Further information is available at
random orbit base can be
www.2helpU.com
used for curved surfaces
and when you need a
Technical data
high-quality finish.
For small hard-to-reach
areas. The detail finger
can be used for light
sanding and for sanding
into corners.
Black & Decker declares that these products described under
The undersigned is responsible for compilation of the technical
(Original instructions)
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Input voltage
V
AC
Power input
W
No-load speed min
-1
Weight kg
Level of sound pressure according to EN 62841:
Sound pressure (L ) 85.5 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 93.5 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
(a ) 9.8 m/s , uncertainty (K) 1.5 m/s
2
h

EC declaration of conformity

MACHINERY DIRECTIVE
BEW200 Sander
"technical data" are in compliance with.
2006/42/EC, EN 62841-1:2015 + AC:2015 +A11:2022 ,
EN62841-2-4:2014.
These products also comply with Directive 2014/30/EC and
2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
file and makes this declaration on behalf of Black & Decker.
ENGLISH
BEW200
12000
1.40 (with detail base),
1.34 (with ROS base)
2
Patrick Diepenbach
General Manager, Benelux
Black and Decker,
Egide Walschaertsstraat 14-18
2800 Mechelen, Belgium
23/09/2022
230
200
9