Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BEFORE FIRST USE
•
To avoid any damage, place the appliance in an upright position for at least 24 hours before initiation.
•
After removing the packaging, make sure that the appliance is in good condition.
•
Do not allow children to play with the packaging materials as there is risk of suffocation.
The appliance shall be installed on a flat surface where the air inlet/outlet would not be blocked. The required
distance around the unit should be at least 30cm. To save energy, keep windows and door closed when the
appliance is running.
Never install the unit where it could be subject to:
Heat sources such as radiators, heat registers, stoves or other products that produce heat;
In an area where oil or water may be splashed;
Direct sunlight;
Mechanical vibration or shock;
Excessive dust;
Lack of ventilation, such as cabinet or bookcase;
Uneven surface.
Warning:
Install the unit in rooms which exceed 6 m².
Do not install the unit in a place where inflammable gas may leak.
Operating the device safely:
Operate this appliance in an ambient temperature from 5°C to 35°C.
Do not use outdoors. This appliance is intended for indoor residential applications only.
Do not operate this appliance in close proximity to walls, curtains, or other objects that may block inlet and
outlet.
Keep the air inlet and outlet free of obstacles.
Do not operate or store the unit in direct sunlight or rain.
It is normal for air outlet to feel warm to touch after continuous operation on hot days.
Empty the water tank before moving the appliance.
Make sure the water tank is correctly fitted otherwise the unit will not operate properly.
The appliance starts up in the mode selected when the unit was last used. There is a protective 3-minutes
time delay of the compressor. Wait 3 minutes for the appliance to resume dehumidification.
- 8 -
Werbung
Inhaltsverzeichnis
