Maintenance And Repair - Emerio DH-127489.1 Bedienungsanleitung

26. The appliance shall be installed in accordance with national
wiring regulations.
27. Any person who is involved with working on or breaking
into a refrigerant circuit should hold a current valid
certificate from an industry-accredited assessment
authority, which authorizes their competence to handle
refrigerants safely in accordance with an industry,
recognized assessment specification.
28. Servicing shall only be performed as recommended by the
equipment
requiring the assistance of other skilled personnel shall be
carried out under the supervision of the person competent
in the use of flammable refrigerants.
29. Do not use means to accelerate the defrosting process or
to clean, other than those recommended by the
manufacturer.
30. The appliance shall be stored in a room without
continuously operating ignition sources (for example: open
flames, an operating gas appliance or an operating electric
heater.)
31. Do not pierce or burn.
32. Be aware that refrigerants may not contain an odour.
33. Pipe-work (inside the appliance) shall be protected from
physical damage and shall not be installed in an
unventilated space, if that space is smaller than 6m².
34. Compliance with national gas regulations shall be observed.
35. Do not touch the aluminum fins behind the air inlet.
36. Do not operate the appliance if it is dropped, damaged or
showing signs of product malfunction.
37. Do not clean the appliance with any chemicals.
38. The appliance must be stored in such a way as to prevent
mechanical failure.
39. To avoid any damage, place the appliance in an upright
position for at least 24 hours before initiation.
40. Regarding the instructions for repairing appliances
containing R290, please kindly refer to below paragraphs.
manufacturer. Maintenance
- 4 -
and repair